- Home
- Car battery check
Car battery voltage check
A healthy 12-volt car battery reads about 12.6 volts with the engine off, stays above about 9.6 volts while the engine cranks, and the charging system holds roughly 13.7 to 14.7 volts with the engine running. Pick when you measured, enter your reading, and see whether the battery is charged, weak, or the alternator is not charging. From the technicians at Prestige Auto Repairs & Tires in Oakland Park and Fort Lauderdale.
12.6 V with the engine off is a full charge. If the car still struggles to start, have the battery load tested: a battery can show full voltage and still be weak.
How to measure it
- Engine off: let the car sit at least an hour (overnight is better), lights off, then put the meter on the battery posts, red to +, black to −.
- While cranking: keep the meter on and have someone start the engine; note the lowest number.
- Engine running: measure again at idle, then with the headlights and A/C on.
| Reading | Charge |
|---|---|
| 12.6 V or more | Fully charged |
| 12.4 V | About 75% |
| 12.2 V | About 50% |
| 12.0 V | About 25% |
| Below 11.9 V | Discharged |
Guide figures for a standard 12-volt lead-acid or AGM battery. Hybrids and EVs also have a high-voltage battery; this check is for the 12-volt one only. Voltage alone cannot show every weak battery: a load test can.
We test the whole starting and charging system
A dead battery is often the symptom, not the cause: a weak alternator, a slipping belt, a corroded cable or something draining power overnight will flatten a new battery too. We load test the battery, check the starter and alternator output, and register the new battery on cars that need it. See battery replacement in Fort Lauderdale and in Oakland Park.
A battery warning light on the dash? Start with the dashboard warning lights guide.