Brake caliper painting is done in house at Prestige Auto Repairs & Tires, in the same body and paint area that handles collision repairs at our Fort Lauderdale shop, 930 NE 4th Ave, open Monday to Saturday, 8 AM – 7 PM, and at our Oakland Park shop, 250 NE 44th St, open 7 days, 8 AM – 7 PM. Painted calipers are one of the most visible changes you can make behind an open-spoke wheel, and on a car that already has red, yellow or blue factory calipers, a fresh coat brings back a finish that brake dust and Florida sun have dulled.
Because this is brake work as well as paint work, every caliper job starts with the brakes themselves. We photograph the pads, rotors, caliper seals and hoses with the wheels off, and if something needs attention we tell you before any paint goes on.
Why we inspect the brakes before painting
Paint should go on a brake system that is healthy. With the wheels off, we check:
- Pad thickness at every corner, and whether the pads wear evenly
- Rotor condition, including thickness, lip, scoring and cracks around the drilled holes
- Caliper dust boots and seals, which crack with age and heat and let water reach the piston
- Slide pins on floating calipers, which stick when their grease dries out
- Brake hoses and fittings for swelling, cracks or seepage
If the pads or rotors are near the end of their life, it makes sense to paint during the brake repair, because the parts are already apart. A seized caliper should be repaired or replaced before it is painted, since paint will not fix a caliper that drags.
How we paint brake calipers
- Wheels off and inspection. Photos of the brakes, then a written estimate for the paint and any brake work you choose.
- Cleaning. Brake dust, road film and old grease come off with a brake cleaner and brushes. A caliper that is not clean will not hold the coating.
- Surface preparation. Loose rust and flaking finish are removed, and the surface is scuffed so the coating can bond.
- Masking. Pads, rotors, pistons, dust boots, bleeder screws, brake hoses, sensors and the hub are covered. Nothing is sprayed on a braking surface.
- Coating. A high-temperature caliper coating goes on in thin, even coats, in the color you picked from a test card.
- Curing and refit. Once the coating has cured, the masking comes off, the wheels go back on and are torqued to the factory figure, and we test drive the car.
Calipers can also be painted to match new aftermarket wheels, a car color, or the factory accent color on your model. Paint on the caliper brackets and drums is quoted separately when you want those done too.
Paint, powder coating or caliper covers?
| Option | How it works | What to know |
|---|---|---|
| Caliper paint | High-temperature coating sprayed on the caliper, usually on the car | No brake disassembly needed on healthy brakes; can be touched up or recolored later |
| Powder coating | Caliper removed, stripped and rebuilt, coating baked on in an oven | A full brake system rebuild; seals and pistons usually replaced at the same time |
| Snap-on covers | A plastic or metal shell clipped over the caliper | Can trap heat and brake dust, and some loosen or rattle; we do not recommend them |
For most cars that come in for calipers, paint gives a clean result without taking the hydraulic system apart. Powder coating makes more sense when the calipers are already being rebuilt.
Which cars suit painted calipers
Any car with open wheels can have painted calipers. The most common requests we see are on Porsche, BMW M, Mercedes-AMG, Audi RS, Tesla, Corvette and Mustang models, where large fixed calipers sit right behind the spokes. Owners of exotic cars often ask us to refresh a factory caliper color that has faded or chipped after years of brake dust and track days; our exotic car body and paint team handles those finishes.
On a leased car, check your lease terms before changing the caliper color, because some leases ask for the car to go back in its original condition.
South Florida heat, salt air and brake dust
Calipers in Broward live in a hard place. Afternoon storms and puddles cool them suddenly, salt air near the beach corrodes bare iron, and brake dust bakes onto them in the summer heat. Unpainted iron calipers rust on the surface within months, which is why a lot of owners first ask about painting when they put on new tires and wheels. Rinsing the wheels often and adding a ceramic coating keeps a painted caliper looking clean for longer.
Estimates and booking
Send photos of your wheels and calipers with an estimate request, call either shop, or walk in. We write the estimate after looking at the brakes, so you know whether the job is paint only or paint with a brake service. Our service advisors speak English and Spanish. If you would rather not drive in, call the shop to schedule concierge pickup and delivery. For the rest of our paint and panel work, see collision repair, auto body and paint.
Part of our body, glass and claims guide: Auto body shop in Fort Lauderdale



